125 litre AdBlue tanks

125 litre AdBlue tanks are a very popular size of tank. Perfect for use on construction sites of all nature. Including highway works, rail works, ground works and many other applications. Easy to transport for use on sites that require a short term fuelling solution. At Tank Station we have a wide range of 125 litre AdBlue®tanks from leading manufacturers based here in the UK. Including Atlantis, Carbery, Cemo and Harlequin. All of these tanks have been tested to exceed all current regulations. All of these tanks can be supplied with a wide range of accessories. Including pumps, flow meters, filters, hose reels, fuel management systems and much more.

AdBlue® has become a part of life for any one with a modern Diesel car or commercial vehicle. Plant machinery has also shifted towards the use of AdBlue® in order to meet European emissions regulations. Consumption of AdBlue® by large plant and lorries can be staggering. For example a CAT D6T bulldozer can use 10-15 litres a day. Bulk purchases of AdBlue are far more economic and the savings can be significant. Our range includes tanks with full dispensing equipment and these tanks can be transported. Allowing for top up from a central/depot location.

Click on the below link if you’d to know more information about AdBlue® itself as product:

Customer Assistance

We are happy to advise and assist you to provide the most suitable set up for 125 litre AdBlue tanks. We understand that fuelling demands are not the same in every situation. But there is a set up for you amongst the range of 1000 litre AdBlue® tanks that we can supply.

Accessories

At Tank Station we stock a full range of accessories for 125 litre AdBlue tanks. AdBlue® pumps and accessories have been specifically developed to dispense AdBlue® in a safe and controlled manner. Pumps and other equipment are made using stainless steel and plastic. AdBlue® has corrosive qualities and reacts in such a way with metal. For this reason AdBlue® tanks are manufactured from plastics and not steel. Outer bunds can be manufactured from steel to provide additional strength and protection from collisions. But the inner containment tank is made from plastic.

FAQ’S

Here are some of our most frequently asked questions relating to Diesel tanks. We trust we have covered most queries, but if you have any further questions and queries please do not hesitate to contact our sales team: sales@tankstation.co.uk alternatively you can speak to our tank expert: Technical Terry via our live chat

AdBlue Tanks

AdBlue® works alongside vehicle engine selective catalytic reduction (SCR) systems to reduce nitrogen oxide (NOx) exhaust emissions. Vehicles that use the active emissions control technology can usually be identified by the use of ‘SCR’ or ‘Blue’ in their model names.

After exhaust gas passes through the diesel particulate filter, AdBlue® DEF is sprayed and mixed into it via a dosing control system as it enters the SCR catalytic converter. Here, the ammonia within the urea reacts with NOx in the exhaust stream, neutralising it to form harmless nitrogen (N2) and water vapour (H2O), while additionally reducing total fuel consumption by 2-6%.

AdBlue and SCR systems are highly effective, reducing NOx emissions by up to 90%, hydrocarbon and carbon monoxide emissions by 50-90%, and particulate emissions by 30-50%.

No AdBlue cannot be stored in mild steel metal tanks, due to corrosive qualities that react with mild steel. AdBlue can be stored in plastic tanks- polyethylene, polypropylene, polyisobutylene, PFA, PFE, PVDF, PTFE. It can also be stored in stainless steel tanks, but for cost reasons this is unusual.

Delivery

At Tankstation we are committed to providing our customers with the most efficient end to end service available. This can be tricky as we work with many manufacturers and they offer different lead times, but we will discuss this with you prior to order. Below are our general terms for delivery of tanks and all other products:

Delivery options based on request

Standard delivery options will include:

  • parcel delivery for small items
  • Kerbside delivery for manually handleable items
  • Kerbside delivery for tanks and a tail lift unload capability or an unload capability on your end (this will be confirmed and agreed at time of order)
  • HIAB (crane off load) delivery, this is available at an extra cost. This will be quoted at time of order and is based on your location.
  • Articulated vehicle (approximately 16.5m long x 2.6m wide x 4m high). This will have no offload capability and will be the responsibility of the customer to provide a means of unloading, by way of telehandler or fork lift (please make a note of the product weight, to make sure your lifting machinery is suitable and capable). Any restrictions to access, such as narrow roads or height/weight restrictions and turning points MUST be stated at time of order. The driver may refuse to enter locations with restrictions that have not been previously stated and noted. We will do our best to provide the most suitable mode of transport based upon information received from the customer at time of order.
  • 18 tonne tail lift vehicle (approximately 8.2m long x 2.6m wide x 4m high). This will have no offload capability and will be the responsibility of the customer to provide a means of unloading, by way of telehandler or forklift (please make a note of the product weight, to make sure your lifting machinery is suitable and capable). Any restrictions to access, such as narrow roads or height/weight restrictions and turning points MUST be stated at time of order. The driver may refuse to enter locations with restrictions that have not been previously stated and noted. We will do our best to provide the most suitable mode of transport based upon information received from the customer at time of order.

Please note that all deliveries are kerbside and it is the responsibility of the customer to arrange suitable machinery for positioning and placing tanks in location. On request we can provide HIAB (crane off load) delivery, but this will be at an extra cost and positioning of tanks will depend on safe and easy access to desired location.

Small items, such as accessories and anything that can be delivered via courier will be delivered within 1-3 days. Subject to stock availability and next day service is available on some items (at an additional cost).

 

 

This is possible, but it will depend on which stage the order has already reached. Please contact us as soon as you can and we will try to avoid any additional costs to rearrange the delivery address being incurred by you, but this cannot be guaranteed.

Unfortunately deliveries can only be made on weekdays.

It is advisable that you or a representative is at the delivery address on the day of delivery. This is in order to check the goods and sign for them, it is also required for unloading of large items when 'special' delivery arrangements have not been made.

All orders are followed up with an email confirmation and this will include delivery details and an estimated delivery date.

Small packages will be delivered by either Royal Mail or other couriers. The driver will leave a card with information how and where to collect the item from their nearest depot. Larger items, such as palletised goods, will need to be re-arranged for delivery and will most likely incur additional costs. Tanks and other goods that require HGV delivery will require additional payment and the delivery will have to be a re-arranged for a later date, as close to the original delivery date as possible.

Some products can be available for next day delivery service, but cut off times may vary. You should contact our sales team as early as possible to discuss opportunities for this service.

Lead times generally relate to products either in manufacture or about to enter manufacture, such as bespoke products and products that are not in general product (special order). Lead times are available on the product page and once an order is made we will update you weekly on the progress of completion and delivery of your product.